Smart Classroom Guide

Green Board or White Board? How to Choose Classroom Writing Boards

Chalk or marker, which surface quality, what size and how high to fix it: the decisions that decide whether a board still writes cleanly in ten years.

A classroom board is used every period of every working day. Most schools choose one by price, and find out about the surface only when it starts to show old writing, scratches or glare.

This guide covers the decisions that matter, in the order a school should make them.

The surface decides how long a board lasts. The frame only holds it.

What is the difference between a green board and a white board?

A green board is a chalk board. A white board is a marker board.

On a green board, teachers write with chalk and clean with a duster. Chalk is cheap and easy to find, so running costs stay low, but writing and cleaning produce dust.

On a white board, teachers write with dry-erase markers and wipe the board clean. There is no chalk dust, and colours stand out well, but markers cost more than chalk and dry out if left uncapped.

Many schools use green boards in regular classrooms and white boards in computer labs, staff rooms and rooms with electronic equipment, where dust is a concern.

Which surface quality should a school choose?

Choose by how often the board is used and how long it must last. Ceramic lasts longest, magnetic is the everyday middle choice, and non-magnetic suits light use.

QualitySurfaceHolds magnetsBest for
Non-magneticCoated writing surface without steelNoRooms used occasionally, tight budgets
MagneticCoated steelYesRegular classrooms where teachers put up charts
CeramicVitreous enamel fused to steelYesClassrooms used all day, every day, for many years

A ceramic surface is very hard. It resists scratches and stains, and wipes clean without leaving faint old writing behind (often called ghosting). Coated surfaces are fine for regular use but wear faster under heavy daily writing.

All three are available as green chalk boards and white marker boards.

What board size suits each room?

For most classrooms, 8×4 ft or 10×4 ft. Use 6×4 ft for small rooms and 12×4 ft for large rooms and labs.

SizeApprox. in cmTypical room
6 × 4 ft183 × 122Small classrooms, primary sections, tutorial rooms
8 × 4 ft244 × 122Standard classrooms
10 × 4 ft305 × 122Large classrooms
12 × 4 ft366 × 122Laboratories, seminar halls, wide rooms

A wider board lets a teacher keep one section, such as homework or key formulas, on the board while using the rest for the lesson. Measure the clear wall width first: leave space for doors, switches and, if planned, an interactive panel.

How high should a classroom board be fixed?

High enough that students in the back row can see the lowest line, and low enough that the teacher, or the children in primary classes, can reach the top.

There is no single correct height, because it depends on the age of the students and whether the teacher stands on a raised platform. Before fixing, stand at the back of the room and check that the bottom of the board is visible over the heads of seated students, then check that the person who writes on it can reach the top comfortably.

In primary classes, fix the board lower so children can write on it themselves.

Also check for glare. White boards have a smoother surface and can reflect light from windows and tube lights. Fix boards on a wall where sunlight does not fall directly on them, and look at the board from the side rows before fixing.

How do you clean and care for each board?

Clean chalk boards with a dry duster daily. Wipe marker boards soon after use, and use only dry-erase markers.

Green chalk board: use a dry duster every day. Wipe with a slightly damp cloth once a week and let the board dry fully before writing, as chalk does not write well on a wet surface.

White marker board: wipe off writing the same day, because old marker is harder to remove. Use only dry-erase markers. If someone uses a permanent marker by mistake, write over it with a dry-erase marker and wipe both off together; this works on most surfaces.

On both types, avoid scouring powder, steel wool and harsh cleaners, which scratch the surface and make ghosting worse.

Frequently Asked Questions

Is a green board the same as a chalk board?

Yes. A green board is a chalk board. Green boards have replaced the older black boards in most schools, and chalk writing shows up clearly on them.

Is a white board the same as a marker board?

Yes. A white board is a marker board, written on with dry-erase markers and wiped clean.

What are the standard classroom board sizes?

The common sizes are 6×4 ft, 8×4 ft, 10×4 ft and 12×4 ft. Custom sizes can be made to fit a wall.

What is a ceramic board?

A ceramic board has a vitreous enamel surface fused to steel. It is the hardest and longest-lasting board surface, resists scratches and ghosting, and holds magnets.

Which is better for a school, chalk board or marker board?

Neither is better for every room. Chalk boards have lower running costs; marker boards avoid chalk dust. Many schools use chalk boards in classrooms and marker boards in labs and staff rooms.

Can magnets be used on every board?

No. Only magnetic and ceramic boards hold magnets. Non-magnetic boards do not.

Need boards for your school?

Tell us the rooms, sizes and quality. We send a written quotation and fix the boards on your walls.

See board sizes and qualities →
SmartSchool Solutions
Classroom and campus technology · Anna Nagar, Madurai, Tamil Nadu

We supply and install classroom and campus technology for schools and colleges across Tamil Nadu, and have worked with schools since 2014. The advice in this guide is what we check on site before a school buys.

Scroll to Top